TONE TUBBY ALNICO HEMPCONE 12 AND CERAMIC HEMPCONE 10 IN FENDER DELUXE REVERB BAFFLE WITH WEBER BEAM BLOCKERS447 viewsLoaded 2X10 Deluxe Reverb Baffle, (1) 10" 16ohm Ceramic Tone Tubby and (1) 10" 16 ohm Alnico Tone Tubby in great condition, both speakers are HEMP CONE and come with Weber Beam Blockers!, You can see the Webers in one of the pics. This baffle was removed from a JD Newell Deluxe Reverb Cabinet and mounts with screws from the back of the cabinet thru an offset block in the cab. The older Deluxe Reverbs mounted this way but I am not sure about the Reissues.These 16 ohm Tone Tubbies are wired in parallel for an 8 ohm Silverface Deluxe Reverb so they will drop right in your 8 ohm setup. Total change out time is about 10 minutes, this would be a great dual tone setup with your existing speaker and baffle, If you get tired of the 1x12 sound just drop this baffle in for a great 2x10 Tone Tubby sound. If you are not familiar with Tone Tubby speakers, check out www.tonetubby.com and see what all the excitement is about. I think they have sound samples on their site.
Baffle dimensions are 22 1/2 X 13 1/2 inches.
|
|
TONE TUBBY ALNICO HEMPCONE 12 AND CERAMIC HEMPCONE 10 IN FENDER DELUXE REVERB BAFFLE WITH WEBER BEAM BLOCKERS211 viewsLoaded 2X10 Deluxe Reverb Baffle, (1) 10" 16ohm Ceramic Tone Tubby and (1) 10" 16 ohm Alnico Tone Tubby in great condition, both speakers are HEMP CONE and come with Weber Beam Blockers!, You can see the Webers in one of the pics. This baffle was removed from a JD Newell Deluxe Reverb Cabinet and mounts with screws from the back of the cabinet thru an offset block in the cab. The older Deluxe Reverbs mounted this way but I am not sure about the Reissues.These 16 ohm Tone Tubbies are wired in parallel for an 8 ohm Silverface Deluxe Reverb so they will drop right in your 8 ohm setup. Total change out time is about 10 minutes, this would be a great dual tone setup with your existing speaker and baffle, If you get tired of the 1x12 sound just drop this baffle in for a great 2x10 Tone Tubby sound. If you are not familiar with Tone Tubby speakers, check out www.tonetubby.com and see what all the excitement is about. I think they have sound samples on their site.
Baffle dimensions are 22 1/2 X 13 1/2 inches.
|
|
TONE TUBBY ALNICO HEMPCONE 12 AND CERAMIC HEMPCONE 10 IN FENDER DELUXE REVERB BAFFLE WITH WEBER BEAM BLOCKERS204 viewsLoaded 2X10 Deluxe Reverb Baffle, (1) 10" 16ohm Ceramic Tone Tubby and (1) 10" 16 ohm Alnico Tone Tubby in great condition, both speakers are HEMP CONE and come with Weber Beam Blockers!, You can see the Webers in one of the pics. This baffle was removed from a JD Newell Deluxe Reverb Cabinet and mounts with screws from the back of the cabinet thru an offset block in the cab. The older Deluxe Reverbs mounted this way but I am not sure about the Reissues.These 16 ohm Tone Tubbies are wired in parallel for an 8 ohm Silverface Deluxe Reverb so they will drop right in your 8 ohm setup. Total change out time is about 10 minutes, this would be a great dual tone setup with your existing speaker and baffle, If you get tired of the 1x12 sound just drop this baffle in for a great 2x10 Tone Tubby sound. If you are not familiar with Tone Tubby speakers, check out www.tonetubby.com and see what all the excitement is about. I think they have sound samples on their site.
Baffle dimensions are 22 1/2 X 13 1/2 inches.
|
|
TONE TUBBY ALNICO HEMPCONE 12 AND CERAMIC HEMPCONE 10 IN FENDER DELUXE REVERB BAFFLE WITH WEBER BEAM BLOCKERS216 viewsLoaded 2X10 Deluxe Reverb Baffle, (1) 10" 16ohm Ceramic Tone Tubby and (1) 10" 16 ohm Alnico Tone Tubby in great condition, both speakers are HEMP CONE and come with Weber Beam Blockers!, You can see the Webers in one of the pics. This baffle was removed from a JD Newell Deluxe Reverb Cabinet and mounts with screws from the back of the cabinet thru an offset block in the cab. The older Deluxe Reverbs mounted this way but I am not sure about the Reissues.These 16 ohm Tone Tubbies are wired in parallel for an 8 ohm Silverface Deluxe Reverb so they will drop right in your 8 ohm setup. Total change out time is about 10 minutes, this would be a great dual tone setup with your existing speaker and baffle, If you get tired of the 1x12 sound just drop this baffle in for a great 2x10 Tone Tubby sound. If you are not familiar with Tone Tubby speakers, check out www.tonetubby.com and see what all the excitement is about. I think they have sound samples on their site.
Baffle dimensions are 22 1/2 X 13 1/2 inches.
|
|
TONE TUBBY ALNICO HEMPCONE 12 AND CERAMIC HEMPCONE 10 IN FENDER DELUXE REVERB BAFFLE WITH WEBER BEAM BLOCKERS760 viewsLoaded 2X10 Deluxe Reverb Baffle, (1) 10" 16ohm Ceramic Tone Tubby and (1) 10" 16 ohm Alnico Tone Tubby in great condition, both speakers are HEMP CONE and come with Weber Beam Blockers!, You can see the Webers in one of the pics. This baffle was removed from a JD Newell Deluxe Reverb Cabinet and mounts with screws from the back of the cabinet thru an offset block in the cab. The older Deluxe Reverbs mounted this way but I am not sure about the Reissues.These 16 ohm Tone Tubbies are wired in parallel for an 8 ohm Silverface Deluxe Reverb so they will drop right in your 8 ohm setup. Total change out time is about 10 minutes, this would be a great dual tone setup with your existing speaker and baffle, If you get tired of the 1x12 sound just drop this baffle in for a great 2x10 Tone Tubby sound. If you are not familiar with Tone Tubby speakers, check out www.tonetubby.com and see what all the excitement is about. I think they have sound samples on their site.
Baffle dimensions are 22 1/2 X 13 1/2 inches.
|
|
|
Login
